- Rupture de stock, ce produit n'est plus commercialisé
STHOR Sthor 57092 power screwdriver/impact driver
Sthor 57092, IP20, 4 m, 220 - 240 V, 50 Hz, 3.3 kg, 1 pc(s)
T57092
5906083025877
€36.36
VAT included
Description
Sthor 57092. International Protection (IP) code: IP20. Cable length: 4 m, AC input voltage: 220 - 240 V, AC input frequency: 50 Hz. Weight: 3.3 kg. Quantity per pack: 1 pc(s)
- Electric 1/2" impact wrench. Power 1100W, 450 Nm.
- Included with sockets 17 mm, 19 mm, 21 mm, 22 mm, length of power cord 4 meters. The whole is housed in a handy carrying case.
- Purpose / application
- The impact wrench is an ordinary power tool, class II insulation, designed for loosening and tightening nuts and bolts. Thanks to the electric power supply, it is not required to have a pneumatic system to work with the wrench.
- Empact wrench
- Purpose of use
- Correct, reliable and safe operation of the tool depends on proper operation.
- The wrench is supplied with an electric power supply
- The wrench is supplied complete and does not require assembly.
- Socket wrenches are supplied with the wrench.
- before screwing a bolt or nut with a socket wrench, manually thread the bolt or nut (at least two turns)
- ensure that you have correctly sized the socket wrench in relation to the component to be unscrewed or tightened. Incorrect sizing can result in damage to both the wrench and the nut or bolt
- slip the socket wrench onto the nut or bolt head
- press the switch and hold it in the position corresponding to the desired direction of rotation
- in the case of tightening, press and hold the switch in position F, and in the case of loosening in position R
- in the case of tightening, when the maximum torque is reached, the overload clutch will engage and the drive of the driver will be disconnected. You should then let go of the switch and wait until the motor stops rotating completely
- in the case of loosening, check that the torque with which the nut was tightened does not exceed the maximum torque of the wrench. If this is the case, the overload clutch will also engage and it may not be possible to unscrew the nut
- after unscrewing, release pressure on the device switch and wait until the motor stops rotating completely
- after finishing work, unplug the tool from the power supply and proceed with maintenance
- Package contents
- Sthor electric impact wrench
- impact sockets 17 mm, 19 mm, 21 mm, 22 mm
- 4 meter power cord
- practical carrying case
- .
Data sheet
- Colour
- Black
- Garantie
- 2 ans
- Marque
- STHOR
Specific References
- ean13
- 5906083025877
Comments